Cheapest & Original
Any question, send the mail to findstandards@tom.com directly
findstandards.info
DIN Standards
BSI Standards
ASTM Standards
ISO Standards
SAE Standards
JIS Standards
NFPA Standards
IEEE Standards
Search & Listing Portal for ASTM Standards
Search & Listing Portal for ISO Standards
Search & Listing Portal for IEC Standards
Search & Listing Portal for BSI Standards
Search & Listing Portal for DIN Standards
ASTM D4495-00(2005) Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
ASTM D4496-04e1 Standard Test Method for D-C Resistance or Conductance of Moderately Conductive Materials
ASTM D4497-94(2004)e1 Standard Test Method for Determining the Open Time of Hot Melt Adhesives (Manual Method)
ASTM D4498-07 Standard Test Method for Heat-Fail Temperature in Shear of Hot Melt Adhesives
ASTM D4499-07 Standard Test Method for Heat Stability of Hot-Melt Adhesives
ASTM D4501-01(2009)e1 Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method
ASTM D4502-92(2004) Standard Test Method for Heat and Moisture Resistance of Wood-Adhesive Joints
ASTM D4503-08 Standard Practice for Dissolution of Solid Waste by Lithium Metaborate Fusion
ASTM D4504-94(2005) Standard Specification for Molded Polyethylene Open-Head-Pails for Industrial Shipping of Nonhazardous Goods
ASTM D4505-05 Standard Specification for Preformed Retroreflective Pavement Marking Tape for Extended Service Life
ASTM D4506-08 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Radial Jacking Test
ASTM D4508-06 Standard Test Method for Chip Impact Strength of Plastics
ASTM D4510-05 Standard Test Method for Counting Partial Cleavages in Wool and Other Animal Fibers
ASTM D4511-00(2006) Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat
ASTM D4512-03(2008) Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
ASTM D4513-97(2006) Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving
ASTM D4514-06 Standard Specification for Friction Tape
ASTM D4516-00(2006)e1 Standard Practice for Standardizing Reverse Osmosis Performance Data
ASTM D4517-04 Standard Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy
ASTM D4519-94(2005) Standard Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity
ASTM D4520-03(2008) Standard Practice for Determining Water Injectivity Through the Use of On-Site Floods
ASTM D4522-04 Standard Performance Specification for Feather and Down Fillings for Textile Products
ASTM D4524-86(2005) Standard Test Method for Composition of Plumage
ASTM D4525-08 Standard Test Method for Permeability of Rocks by Flowing Air
ASTM D4526-96(2007) Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography
ASTM D4527-99(2004) Standard Test Methods for Carbon Black—Solvent Extractables
ASTM D4528-88(2007) Standard Classification for Rubber Compounding Materials—Sulfur
ASTM D4529-01(2006) Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D4530-07 Standard Test Method for Determination of Carbon Residue (Micro Method)
ASTM D4531-86(2008) Standard Test Methods for Bulk Density of Peat and Peat Products
ASTM D4532-97(2003) Standard Test Method for Respirable Dust in Workplace Atmospheres
ASTM D4533-04(2009) Standard Test Method for Trapezoid Tearing Strength of Geotextiles
ASTM D4535-08 Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer
ASTM D4537-04a Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating Work Inspection in Nuclear Facilities
ASTM D4538-05e1 Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities
ASTM D4539-09 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
ASTM D4541-09 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM D4542-07 Standard Test Method for Pore Water Extraction and Determination of the Soluble Salt Content of Soils by Refractometer
ASTM D4543-08 Standard Practices for Preparing Rock Core as Cylindrical Test Specimens and Verifying Conformance to Dimensional and Shape Tolerances
ASTM D4544-86(2008) Standard Practice for Estimating Peat Deposit Thickness
ASTM D4546-08 Standard Test Methods for One-Dimensional Swell or Settlement Potential of Cohesive Soils
ASTM D4547-09 Standard Guide for Sampling Waste and Soils for Volatile Organic Compounds
ASTM D4548-91(2002) Standard Test Method for Anion-Cation Balance of Mixed Bed Ion-Exchange Resins
ASTM D4549-03 Standard Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
ASTM D4551-96(2008)e1 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane
ASTM D4552-92(2004) Standard Practice for Classifying Hot-Mix Recycling Agents
ASTM D4553-08 Standard Test Method for Determining In Situ Creep Characteristics of Rock
ASTM D4554-02(2006) Standard Test Method for In Situ Determination of Direct Shear Strength of Rock Discontinuities
ASTM D4555-01(2005) Standard Test Method for Determining Deformability and Strength of Weak Rock by an In Situ Uniaxial Compressive Test
ASTM D4559-99(2004) Standard Test Method for Volatile Matter in Silicone Fluid
ASTM D4561-96(2006) Standard Practice for Quality Control Systems for Organizations Producing and Applying Bituminous Paving Materials
ASTM D4562-01(2007) Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen
ASTM D4563-02(2008) Standard Test Method for Determination by Atomic Absorption Spectroscopy of Titanium Dioxide Content of Pigments Recovered From Whole Paint
ASTM D4564-08 Standard Test Method for Density and Unit Weight of Soil in Place by the Sleeve Method
ASTM D4565-99(2004)e1 Standard Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable
ASTM D4566-08 Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable
ASTM D4567-03(2008) Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM D4568-99(2004)e1 Standard Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds And Polyolefin Wire and Cable Materials
ASTM D4569-06 Standard Test Method for Rubber Compounding Materials—Determination of Acidity in Sulfur
ASTM D4570-02(2007) Standard Test Method for Rubber Chemicals—Determination of Particle Size of Sulfur by Sieving (Dry)
ASTM D4571-06 Standard Test Methods for Rubber Compounding Materials—Determination of Volatile Material
ASTM D4572-89(2005) Standard Test Method for Rubber Chemicals-Wet Sieve Analysis of Sulfur
ASTM D4573-03(2009) Standard Test Method for Rubber Chemicals—Determination of Oil Content in Oil-Treated Sulfur
ASTM D4574-06 Standard Test Methods for Rubber Compounding Materials—Determination of Ash Content
ASTM D4575-09 Standard Test Methods for Rubber Deterioration—Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers
ASTM D4576-08 Standard Test Method for Mold Growth Resistance of Wet Blue
ASTM D4577-05 Standard Test Method for Compression Resistance of a Container Under Constant Load
ASTM D4578-06 Standard Test Methods for Rubber Chemicals—Determination of Percent Sulfur by Extraction
ASTM D4579-00(2006) Standard Practice for Handling an Acid Degreaser or Still
ASTM D4580-03(2007) Standard Practice for Measuring Delaminations in Concrete Bridge Decks by Sounding
ASTM D4581-86(2005) Standard Guide for Measurement of Morphologic Characteristics of Surface Water Bodies
ASTM D4582-05 Standard Practice for Calculation and Adjustment of the Stiff and Davis Stability Index for Reverse Osmosis
ASTM D4583-95(2009) Standard Practice for Carbon Black—Calculation of Process Indexes From an Analysis of Process Control Data
ASTM D4584-05 Standard Test Method for Measuring Apparent pH of Electrocoat Baths
ASTM D4585-07 Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation
ASTM D4586-07 Standard Specification for Asphalt Roof Cement, Asbestos-Free
ASTM D4587-05 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
ASTM D4590-09 Standard Test Method for Colorimetric Determination of p-tert-Butylcatechol In Styrene Monomer or AMS (alpha-Methylstyrene) by Spectrophotometry
ASTM D4591-07 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
ASTM D4592-05 Standard Specification for Preformed Retroreflective Pavement Marking Tape for Limited Service Life
ASTM D4594-96(2009) Standard Test Method for Effects of Temperature on Stability of Geotextiles
ASTM D4595-09 Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method
ASTM D4596-09 Standard Practice for Collection of Channel Samples of Coal in a Mine
ASTM D4597-03 Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers
ASTM D4599-03 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
ASTM D4600-95(2005) Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
ASTM D4601-04 Standard Specification for Asphalt-Coated Glass Fiber Base Sheet Used in Roofing
ASTM D4602-93(2008) Standard Guide for Nondestructive Testing of Pavements Using Cyclic-Loading Dynamic Deflection Equipment
ASTM D4603-03 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer
ASTM D4606-03(2007) Standard Test Method for Determination of Arsenic and Selenium in Coal by the Hydride Generation/Atomic Absorption Method
ASTM D4607-94(2006) Standard Test Method for Determination of Iodine Number of Activated Carbon
ASTM D4608-89(2003) Standard Test Method for Citrate in Detergents
ASTM D4609-08 Standard Guide for Evaluating Effectiveness of Admixtures for Soil Stabilization
ASTM D4610-98(2009) Standard Guide for Determining the Presence of and Removing Microbial (Fungal or Algal) Growth on Paint and Related Coatings
ASTM D4611-08 Standard Test Method for Specific Heat of Rock and Soil
ASTM D4612-08 Standard Practice for Calculating Thermal Diffusivity of Rocks
ASTM D4614-05 Standard Specification for Ethyl Acetate (All Grades)
ASTM D4615-06 Standard Specification for n-Butyl Acetate (All Grades)
ASTM D4616-95(2008) Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch
ASTM D4617-03 Standard Classification System for Phenolic Compounds (PF)
ASTM D4618-92(2003) Standard Specification for Design and Fabrication of Flue Gas Desulfurization System Components for Protective Lining Application
ASTM D4619-96(2004) Standard Practice for Inspection of Linings in Operating Flue Gas Desulfurization Systems
ASTM D4620-02(2007) Standard Test Method for Evaluating the Effective Surface Area of Zinc Oxide in Rubber
ASTM D4621-99(2004) Standard Guide for Quality Management in an Organization That Samples or Tests Coal and Coke
ASTM D4623-08 Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method—USBM Borehole Deformation Gauge
ASTM D4625-04(2009) Standard Test Method for Distillate Fuel Storage Stability at 43°C (110°F)
ASTM D4626-95(2005) Standard Practice for Calculation of Gas Chromatographic Response Factors
ASTM D4627-92(2007) Standard Test Method for Iron Chip Corrosion for Water-Dilutable Metalworking Fluids
ASTM D4628-05 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc In Unused Lubricating Oils By Atomic Absorption Spectrometry
ASTM D4629-09 Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection
ASTM D4630-96(2008) Standard Test Method for Determining Transmissivity and Storage Coefficient of Low-Permeability Rocks by In Situ Measurements Using the Constant Head Injection Test
ASTM D4631-95(2008) Standard Test Method for Determining Transmissivity and Storativity of Low Permeability Rocks by In Situ Measurements Using Pressure Pulse Technique
ASTM D4632-08 Standard Test Method for Grab Breaking Load and Elongation of Geotextiles
ASTM D4633-05 Standard Test Method for Energy Measurement for Dynamic Penetrometers
ASTM D4634-04 Standard Specification for Styrene-Maleic Anhydride Materials (S/MA)
ASTM D4635-08a Standard Specification for Polyethylene Films Made from Low-Density Polyethylene for General Use and Packaging Applications
ASTM D4636-99(2004)e1 Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils
ASTM D4637-08 Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane
ASTM D4638-03(2007) Standard Guide for Preparation of Biological Samples for Inorganic Chemical Analysi
ASTM D4640-86(2001) Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins
ASTM D4641-94(2006) Standard Practice for Calculation of Pore Size Distributions of Catalysts from Nitrogen Desorption Isotherms
ASTM D4642-04 Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry
ASTM D4643-08 Standard Test Method for Determination of Water (Moisture) Content of Soil by Microwave Oven Heating
ASTM D4644-08 Standard Test Method for Slake Durability of Shales and Similar Weak Rocks
ASTM D4645-08 Standard Test Method for Determination of In-Situ Stress in Rock Using Hydraulic Fracturing Method
ASTM D4646-03(2008) Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments
ASTM D4647-06e1 Standard Test Method for Identification and Classification of Dispersive Clay Soils by the Pinhole Test
ASTM D4648-05 Standard Test Method for Laboratory Miniature Vane Shear Test for SaturatedFine-Grained Clayey Soil
ASTM D4649-03(2009) Standard Guide for Selection and Use of Stretch Wrap Films
ASTM D4650-08 Standard Specification for Normal Butane Thermophysical Property Tables
ASTM D4651-08 Standard Specification for Isobutane Thermophysical Property Tables
ASTM D4652-05 Standard Specification for Silicone Fluid Used for Electrical Insulation
ASTM D4653-87(2009) Standard Test Method for Total Chlorides in Leather
ASTM D4654-87(2009) Standard Test Method for Sulfate Basicity in Leather
ASTM D4655-95(2006) Standard Test Methods for Sulfates in Leather (Total, Neutral, and Combined Acid)
ASTM D4658-09 Standard Test Method for Sulfide Ion in Water
ASTM D4659-09 Standard Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of Isocyanates
ASTM D4660-06 Standard Test Methods for Polyurethane Raw Materials: Determination of the Isomer Content of Toluenediisocyanate
ASTM D4661-09 Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine in Isocyanates
ASTM D4662-08 Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols
ASTM D4663-98(2004) Standard Test Method for Polyurethane Raw Materials Determination of Hydrolyzable Chlorine of Isocyanates
ASTM D4669-07 Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols
ASTM D4670-07 Standard Test Method for Polyurethane Raw Materials Determination of Suspended Matter In Polyols
ASTM D4671-05 Standard Test Method for Polyurethane Raw Materials Determination of Unsaturation of Polyols
ASTM D4672-00(2006)e1 Standard Test Methods for Polyurethane Raw Materials: Determination of Water Content of Polyols
ASTM D4673-02(2008) Standard Classification System for Acrylonitrile-Butadiene-Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials
ASTM D4674-02a Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments
ASTM D4675-09 Standard Guide for Selection and Use of Flat Strapping Materials
ASTM D4676-94(2006) Standard Classification for Rubber Compounding Materials-Antidegradants
ASTM D4677-87(2007) Standard Classification for Rubber Compounding Materials—Titanium Dioxide
ASTM D4678-04 Standard Practice for Rubber-Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials
ASTM D4679-02(2007) Standard Specification for Rubber General Purpose, Household or Beautician Gloves
ASTM D4680-98(2004) Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
ASTM D4682-08 Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants
ASTM D4683-04 Standard Test Method for Measuring Viscosity at High Shear Rate and High Temperature by Tapered Bearing Simulator
ASTM D4684-08 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
ASTM D4685-07 Standard Test Method for Pile Fabric Abrasion
ASTM D4687-95(2006) Standard Guide for General Planning of Waste Sampling
ASTM D4688-99(2005) Standard Test Method for Evaluating Structural Adhesives for Finger Jointing Lumber
ASTM D4689-99(2005) Standard Specification for Adhesive, Casein-Type
ASTM D4690-99(2005) Standard Specification for Urea-Formaldehyde Resin Adhesives
ASTM D4691-02(2007) Standard Practice for Measuring Elements in Water by Flame Atomic Absorption Spectrophotometry
ASTM D4692-01(2006)e1 Standard Practice for Calculation and Adjustment of Sulfate Scaling Salts (CaSO4, SrSO4, and BaSO4) for Reverse Osmosis and Nanofiltration
ASTM D4693-07 Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings
ASTM D4694-96(2003) Standard Test Method for Deflections with a Falling-Weight-Type Impulse Load Device
ASTM D4695-03(2008) Standard Guide for General Pavement Deflection Measurements
ASTM D4696-92(2008) Standard Guide for Pore-Liquid Sampling from the Vadose Zone
ASTM D4698-92(2007) Standard Practice for Total Digestion of Sediment Samples for Chemical Analysis of Various Metals
ASTM D4699-03(2008) Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
ASTM D4700-91(2006) Standard Guide for Soil Sampling from the Vadose Zone
ASTM D4701-00(2006) Standard Specification for Technical Grade Methylene Chloride
ASTM D4703-07 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets
ASTM D4704-00(2005) Standard Test Method for Tearing Strength, Tongue Tear of Leather
ASTM D4705-00(2005) Standard Test Method for Stitch Tear Strength of Leather, Double Hole
ASTM D4707-09 Standard Test Method for Measuring Paint Spatter Resistance During Roller Application
ASTM D4708-07 Standard Practice for Preparation of Uniform Free Films of Organic Coatings
ASTM D4709-07 Standard Specification for Methyl Acrylate
ASTM D4710-07 Standard Specification for Acetaldehyde
ASTM D4711-89(2003) Standard Test Method for Sulfonic and Sulfuric Acids in Alkylbenzene Sulfonic Acids
ASTM D4712-87a(2005) Standard Guide for Testing Industrial Water-Reducible Coatings
ASTM D4713-92(2007) Standard Test Methods for Nonvolatile Content of Heatset and Liquid Printing Ink Systems
ASTM D4714-96(2007) Standard Test Method for Determination of Effect of Moist Heat (50 % Relative Humidity and 90C) on Properties of Paper and Board
ASTM D4715-98(2008)e1 Standard Test Method for Coking Value of Tar and Pitch (Alcan)
ASTM D4716-08 Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
ASTM D4718-87(2007) Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles
ASTM D4719-07 Standard Test Method for Prebored Pressuremeter Testing in Soils
ASTM D4720-08 Standard Performance Specification for Soft Window Covering Fabrics for Household Use
ASTM D4721-89(2000) Standard Practice for Evaluation of the Performance of Machine Washable and Drycleanable Bedcoverings and Accessories
ASTM D4723-07e1 Standard Classification Index of and Descriptions of Textile Flammability Test Methods
ASTM D4724-09 Standard Test Methods for Degree of Filament Yarn Entanglement by Needle Insertion Methods
ASTM D4725-08a Standard Terminology for Engine Coolants
ASTM D4726-09 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors
ASTM D4727/D4727M-07 Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes
ASTM D4728-06 Standard Test Method for Random Vibration Testing of Shipping Containers
ASTM D4729-08 Standard Test Method for In Situ Stress and Modulus of Deformation Using Flatjack Method
ASTM D4730-02(2008) Standard Specification for Flooding Compounds for Telecommunications Wire and Cable
ASTM D4731-02(2008)e1 Standard Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable
ASTM D4732-02(2008)e1 Standard Specification for Cool-Application Filling Compounds for Telecommunications Wire and Cable
ASTM D4733-03 Standard Test Methods for Solventless Electrical Insulating Varnishes
ASTM D4734-08 Standard Specification for Refined Benzene-545
ASTM D4735-02 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography
ASTM D4737-04 Standard Test Method for Calculated Cetane Index by Four Variable Equation
ASTM D4739-08e1 Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
ASTM D4740-04(2009) Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test
ASTM D4741-06 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
ASTM D4742-08 Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)
ASTM D4745-08 Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials
ASTM D4746-98(2008) Standard Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration
ASTM D4747-02(2008) Standard Test Method for Determining Unreacted Monomer Content of Latexes Using Gas-Liquid Chromatography
ASTM D4748-06 Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar
ASTM D4749-87(2007) Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size
ASTM D4750-87(2001) Standard Test Method for Determining Subsurface Liquid Levels in a Borehole or Monitoring Well (Observation Well)
ASTM D4751-04 Standard Test Method for Determining Apparent Opening Size of a Geotextile
ASTM D4752-03 Standard Test Method for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub
ASTM D4753-07 Standard Guide for Evaluating, Selecting, and Specifying Balances and Standard Masses for Use in Soil, Rock, and Construction Materials Testing
ASTM D4754-98(2003) Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell
ASTM D4755-95(2004) Standard Test Method for Free Halogens in Halogenated Organic Solvents and Their Admixtures
ASTM D4756-06 Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit
ASTM D4759-02(2007) Standard Practice for Determining the Specification Conformance of Geosynthetics
ASTM D4761-05 Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material
ASTM D4762-08 Standard Guide for Testing Polymer Matrix Composite Materials
ASTM D4763-06 Standard Practice for Identification of Chemicals in Water by Fluorescence Spectroscopy
ASTM D4764-01(2006) Standard Test Method for Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint
ASTM D4765-03(2008) Standard Test Method for Fluorides in Workplace Atmospheres
ASTM D4766-98(2003) Standard Test Method for Vinyl Chloride in Workplace Atmospheres (Charcoal Tube Method)
ASTM D4767-04 Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils
ASTM D4768-03 Standard Test Method for Analysis of 2,6-Ditertiary-Butyl Para-Cresol and 2,6-Ditertiary- Butyl Phenol in Insulating Liquids by Gas Chromatography
ASTM D4769-88(2000) Standard Specification for Woven and Warp Knitted Comforter Fabrics
ASTM D4771-02 Standard Performance Specification for Knitted Upholstery Fabrics for Indoor Furniture
ASTM D4772-09 Standard Test Method for Surface Water Absorption of Terry Fabrics (Water Flow)
ASTM D4773-02(2007) Standard Test Method for Purity of Propylene Glycol Monomethyl Ether, Dipropylene Glycol Monomethyl Ether, and Propylene Glycol Monomethyl Ether Acetate
ASTM D4774-06 Standard Specification for User Applied Drug Labels in Anesthesiology
ASTM D4775-04 Standard Specification for Identification and Configuration of Prefilled Syringes and Delivery Systems for Drugs (Excluding Pharmacy Bulk Packages)
ASTM D4776-04e1 Standard Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure
ASTM D4778-05 Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions
ASTM D4780-95(2007) Standard Test Method for Determination of Low Surface Area of Catalysts by Multipoint Krypton Adsorption
ASTM D4781-03(2008) Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
ASTM D4782-04 Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry
ASTM D4783-01(2008) Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi
ASTM D4784-93(2003) Standard for LNG Density Calculation Models
ASTM D4785-08 Standard Test Method for Low-Level Analysis of Iodine Radioisotopes in Water
ASTM D4786-00(2005) Standard Test Method for Stitch Tear Strength, Single Hole
ASTM D4787-08 Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates
ASTM D4788-03(2007) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
ASTM D4789-08 Standard Test Method for Solution Color of Bisphenol A (4,4′-Isopropylidenediphenol)
ASTM D4790-07 Standard Terminology of Aromatic Hydrocarbons and Related Chemicals
ASTM D4791-05e1 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
ASTM D4792-00(2006) Standard Test Method for Potential Expansion of Aggregates from Hydration Reactions
ASTM D4793-93(2004) Standard Test Method for Sequential Batch Extraction of Waste with Water
ASTM D4794-94(2009) Standard Test Method for Determination of Ethoxyl or Hydroxyethoxyl Substitution in Cellulose Ether Products by Gas Chromatography
ASTM D4795-94(2008) Standard Test Method for Nitrogen Content of Soluble Nitrocellulose—Alternative Method
ASTM D4796-88(2004) Standard Test Method for Bond Strength of Thermoplastic Traffic Marking Materials
ASTM D4797-88(2007) Standard Test Methods for Chemical and Gravimetric Analysis of White and Yellow Thermoplastic Traffic Marking Containing Lead Chromate and Titanium Dioxide
ASTM D4798/D4798M-09 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
ASTM D4799-08 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)
ASTM D4800-94(2005) Standard Guide for Classifying and Specifying Adhesives
ASTM D4801-08 Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm [0.010 in.] and Greater
ASTM D4802-02 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet
ASTM D4803-97(2002)e1 Standard Test Method for Predicting Heat Buildup in PVC Building Products
ASTM D4804-03 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
ASTM D4806-09 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D4807-05e1 Standard Test Method for Sediment in Crude Oil by Membrane Filtration
ASTM D4808-01(2006) Standard Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy
ASTM D4809-09 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
ASTM D4810-06 Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes
ASTM D4811-06 Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing
ASTM D4812-06 Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics
ASTM D4814-09b Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D4815-04 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography
ASTM D4817-88(2005) Standard Classification for Rubber Compounding Materials-Stearic Acid
ASTM D4818-89(2005) Standard Classification for Rubber Compounding Materials-Vulcanization Accelerators
ASTM D4819-96(2005) Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics
ASTM D4821-07 Standard Guide for Carbon Black-Validation of Test Method Precision and Bias
ASTM D4822-88(2008) Standard Guide for Selection of Methods of Particle Size Analysis of Fluvial Sediments (Manual Methods)
ASTM D4823-95(2008) Standard Guide for Core Sampling Submerged, Unconsolidated Sediments
ASTM D4824-03(2008) Standard Test Method for Determination of Catalyst Acidity by Ammonia Chemisorption
ASTM D4825-97(2007) Standard Test Method for Measurement of Curl in Cut-Sized Office Paper
ASTM D4826-88(2007) Standard Practice for Units of Measurement and Conversion Factors for Pulp, Paper, and Paperboard
ASTM D4827-03(2009) Standard Test Method for Determining the Unreacted Monomer Content of Latexes Using Capillary Column Gas Chromatography
ASTM D4828-94(2008) Standard Test Methods for Practical Washability of Organic Coatings
ASTM D4829-08a Standard Test Method for Expansion Index of Soils
ASTM D4830-98(2006) Standard Test Methods for Characterizing Thermoplastic Fabrics Used in Roofing and Waterproofing
ASTM D4831-00(2005) Standard Test Method for Buckle Tear Strength of Leather
ASTM D4832-02 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders
ASTM D4833-07 Standard Test Method for Index Puncture Resistance of Geomembranes and Related Products
ASTM D4834-03(2008) Standard Test Method for Detection of Lead in Paint by Direct Aspiration Atomic Absorption Spectroscopy
ASTM D4835-08 Standard Specification for Propylene Glycol Monomethyl Ether Acetate
ASTM D4836-09 Standard Specification for Dipropylene Glycol Monomethyl Ether
ASTM D4837-07 Standard Specification for Propylene Glycol Monomethyl Ether
ASTM D4838-88(2003) Standard Test Method for Determining the Relative Tinting Strength of Chromatic Paints
ASTM D4839-03 Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
ASTM D4840-99(2004) Standard Guide for Sampling Chain-of-Custody Procedures
ASTM D4841-88(2008) Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents
ASTM D4843-88(2004)e1 Standard Test Method for Wetting and Drying Test of Solid Wastes
ASTM D4844-03(2009) Standard Guide for Air Monitoring at Waste Management Facilities for Worker Protection
ASTM D4845-09 Standard Terminology Relating to Wool
ASTM D4846-96(2004) Standard Test Method for Resistance to Unsnapping of Snap Fasteners
ASTM D4847-02(2008) Standard Performance Specification for Woven Awning and Canopy Fabrics
ASTM D4848-98(2004) Standard Terminology of Force, Deformation and Related Properties of Textiles
ASTM D4849-02b(2007) Standard Terminology Relating to Yarns and Fibers
ASTM D4850-08 Standard Terminology Relating to Fabrics and Fabric Test Methods
ASTM D4851-07 Standard Test Methods for Coated and Laminated Fabrics for Architectural Use
ASTM D4852-88(2009)e1 Standard Practice for Evaluation of Attached Upholstery Fabrics
ASTM D4856-99(2004) Standard Test Method for Determination of Sulfuric Acid Mist in the Workplace Atmosphere (Ion Chromatographic)
ASTM D4857-08 Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards
ASTM D4858-08 Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines
ASTM D4859-08 Standard Specification for Lubricants for Two-Stroke-Cycle Spark-Ignition Gasoline Engines-TC
ASTM D4860-08 Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating)
ASTM D4861-05 Standard Practice for Sampling and Selection of Analytical Techniques for Pesticides and Polychlorinated Biphenyls in Air
ASTM D4863-08 Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants
ASTM D4864-90(2005) Standard Test Method for Determination of Traces of Methanol in Propylene Concentrates by Gas Chromatography
ASTM D4865-98(2003)e1 Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
ASTM D4866-88(2003)e1 Standard Performance Specification for Coal Tar Pitch Emulsion Pavement Sealer Mix Formulations Containing Mineral Aggregates and Optional Polymeric Admixtures
ASTM D4867/D4867M-09 Standard Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures
ASTM D4868-00(2005) Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels
ASTM D4869-05e1 Standard Specification for Asphalt-Saturated Organic Felt Underlayment Used in Steep Slope Roofing
ASTM D4870-09 Standard Test Method for Determination of Total Sediment in Residual Fuels
ASTM D4871-06 Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus
ASTM D4872-99(2004)e1 Standard Test Method for Dielectric Testing of Wire and Cable Filling Compounds
ASTM D4873-02(2009) Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls and Samples
ASTM D4874-95(2006) Standard Test Method for Leaching Solid Material in a Column Apparatus
ASTM D4875-05 Standard Test Methods of Polyurethane Raw Materials: Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols
ASTM D4877-04 Standard Test Method for Polyurethane Raw Materials: Determination of APHA Color in Isocyanates
ASTM D4878-08 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols
ASTM D4879-08 Standard Guide for Geotechnical Mapping of Large Underground Openings in Rock
ASTM D4880-08 Standard Test Method for Salt Water Proofness of Insulating Varnishes Over Enamelled Magnet Wire
ASTM D4881-05 Standard Test Method for Thermal Endurance of Varnished Fibrous- or Film-Wrapped Magnet Wire
ASTM D4882-05 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test
ASTM D4883-08 Standard Test Method for Density of Polyethylene by the Ultrasound Technique
ASTM D4884-09 Standard Test Method for Strength of Sewn or Thermally Bonded Seams of Geotextiles
ASTM D4885-01(2006) Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method
ASTM D4886-88(2002) Standard Test Method for Abrasion Resistance of Geotextiles (Sand Paper/Sliding Block Method)
ASTM D4887-99(2003) Standard Practice for Preparation of Viscosity Blends for Hot Recycled Bituminous Materials
ASTM D4888-06 Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes
ASTM D4889-04 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates
ASTM D4890-06 Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of Polyols
ASTM D4891-89(2006) Standard Test Method for Heating Value of Gases in Natural Gas Range by Stoichiometric Combustion
ASTM D4892-89(2009) Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)
ASTM D4893-94(2004) Standard Test Method for Determination of Pitch Volatility
ASTM D4894-07 Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials
ASTM D4895-04 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion
ASTM D4896-01(2008)e1 Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results
ASTM D4897/D4897M-01(2009) Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing
ASTM D4898-90(2005) Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis
ASTM D4899-99(2009) Standard Practice for Analysis of Vegetable Tanning Materials-General
ASTM D4900-99(2009) Standard Test Method for Lignosulfonates (Sulfite Cellulose) in Tanning Extracts
ASTM D4901-99(2009) Standard Practice for Preparation of Solution of Liquid Vegetable Tannin Extracts
ASTM D4902-99(2009) Standard Test Method for Evaporation and Drying of Analytical Solutions
ASTM D4903-99(2009) Standard Test Method for Total Solids and Water in Vegetable Tanning Material Extracts
ASTM D4904-99(2009) Standard Practice for Preparation of Solution of Liquid Vegetable Tannin Extracts
ASTM D4905-99(2009) Standard Practice for Preparation of Solution of Solid, Pasty and Powdered Vegetable Tannin Extracts
ASTM D4906-95(2006) Standard Test Method for Total Solids and Ash Content in Leather Finishing Materials
ASTM D4907-00(2005) Standard Test Method for Nitrocellulose in Finish on Leather
ASTM D4910-08 Standard Tables of Body Measurements for Children, Infant Sizes—Preemie to 24 Months
ASTM D4912-07 Standard Test Method for Fabric Stability of Vinyl-Coated Glass Yarn Insect Screening and Louver Cloth
ASTM D4913-00(2005)e1 Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors
ASTM D4914-08 Standard Test Methods for Density and Unit Weight of Soil and Rock in Place by the Sand Replacement Method in a Test Pit
ASTM D4917-97(2007)e1 Standard Test Method for Coefficient of Static and Kinetic Friction of Uncoated Writing and Printing Paper by Use of the Horizontal Plane Method
ASTM D4918-97(2007) Standard Test Method for Coefficient of Static Friction of Uncoated Writing and Printing Paper by Use of the Inclined Plane Method
ASTM D4919-03(2008) Standard Specification for Testing of Hazardous Materials Packagings
ASTM D4920-08 Standard Terminology Relating to Conditioning, Chemical, and Thermal Properties
ASTM D4921-95(2006) Standard Test Method for Foaming Tendencies of Engine Coolants at Room Temperature
ASTM D4922-09 Standard Test Method for Determination of Radioactive Iron in Water
ASTM D4923-01 Standard Specification for Reinforced Thermosetting Plastic Poles
ASTM D4924-89(2005) Standard Classification for Petroleum Waxes for Use in Rubber Compounding
ASTM D4926-06 Standard Test Method for Gamma Alumina Content in Catalysts Containing Silica and Alumina by X-ray Powder Diffraction
ASTM D4927-05 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D4928-00(2005) Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration
ASTM D4929-07 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
ASTM D4930-06 Standard Test Method for Dust Control Material on Calcined Petroleum Coke
ASTM D4931-06 Standard Test Method for Gross Moisture in Green Petroleum Coke
ASTM D4932-89(2006) Standard Test Method for Fastener Rupture and Tear Resistance of Roofing and Waterproofing Sheets, Roll Roofing, and Shingles
ASTM D4933-99(2004) Standard Guide for Moisture Conditioning of Wood and Wood-Base Materials
ASTM D4934-02(2006) Standard Test Method for Rubber Compounding Materials: 2-Benzothiazyl Sulfenamide Accelerators-Insolubles
ASTM D4936-05 Standard Test Method for Mercaptobenzothiazole Sulfenamide Assay by Reduction/Titration
ASTM D4937-96(2006)e1 Standard Test Method forp-Phenylenediamine Antidegradants Purity by Gas Chromatography
ASTM D4938-89(2007) Standard Test Method for Erosion Testing of Antifouling Paints Using High Velocity Water
ASTM D4939-89(2007) Standard Test Method for Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear Forces in Natural Seawater
ASTM D4940-98(2003) Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blasting Abrasives
ASTM D4941-06 Standard Practice for Preparing Drawdowns of Artists' Paste Paints
ASTM D4942-89(2006) Standard Test Methods for Water Pickup of Lithographic Printing Inks and Vehicles in a Laboratory Mixer
ASTM D4943-08 Standard Test Method for Shrinkage Factors of Soils by the Wax Method
ASTM D4944-04 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester
ASTM D4945-08 Standard Test Method for High-Strain Dynamic Testing of Piles
ASTM D4946-89(2008)e1 Standard Test Method for Blocking Resistance of Architectural Paints
ASTM D4947-05 Standard Test Method for Chlordane and Heptachlor Residues in Indoor Air
ASTM D4948-89(2006) Standard Test Method for Determination of the Upper Layer Separated from a Viscous Liquid
ASTM D4949-94(2002) Standard Test Method for Determination of D-C Resistivity of Writing Paper (Keithley Method)
ASTM D4950-08 Standard Classification and Specification of Automotive Service Greases
ASTM D4951-09 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D4952-09 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
ASTM D4953-06 Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)
ASTM D4954-89(2003) Standard Test Method for Determination of Nitrilotriacetates in Detergents
ASTM D4955-89(2008) Standard Practice for Field Evaluation of Automotive Polish
ASTM D4956-09 Standard Specification for Retroreflective Sheeting for Traffic Control
ASTM D4957-08 Standard Test Method for Apparent Viscosity of Asphalt Emulsion Residues and Non-Newtonian Bitumens by Vacuum Capillary Viscometer
ASTM D4958-97(2004) Standard Test Method for Comparison of the Brush Drag of Latex Paints
ASTM D4959-07 Standard Test Method for Determination of Water (Moisture) Content of Soil By Direct Heating
ASTM D4960-08 Standard Test Method for Evaluation of Color for Thermoplastic Traffic Marking Materials
ASTM D4962-02(2009) Standard Practice for NaI(Tl) Gamma-Ray Spectrometry of Water
ASTM D4963-04 Standard Test Method for Ignition Loss of Glass Strands and Fabrics
ASTM D4964-96(2008)e1 Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
ASTM D4965-96(2008) Standard Terminology of Seams and Seam Finishes Used in Home Sewing
ASTM D4966-98(2007)e1 Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method)
ASTM D4967-99(2004)e1 Standard Guide for Selecting Materials to Be Used for Insulation, Jacketing and Strength Components in Fiber-Optic Cables
ASTM D4968-08 Standard Guide for Annual Review of Test Methods and Specifications for Plastics
ASTM D4969-07 Standard Specification for Polytetrafluoroethylene-(PTFE) Coated Glass Fabric
ASTM D4970-07 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Martindale Tester
ASTM D4971-08 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Using Diametrically Loaded 76-mm (3-in.) Borehole Jack
ASTM D4972-01(2007) Standard Test Method for pH of Soils
ASTM D4974-04 Standard Test Method for Hot Air Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven
ASTM D4975-04 Standard Test Methods for Single-Filament Tire Bead Wire Made from Steel
ASTM D4976-06 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
ASTM D4977-03(2009) Standard Test Method for Granule Adhesion to Mineral Surfaced Roofing by Abrasion
ASTM D4978-95(2007) Standard Test Methods for Screening of Reactive Sulfides in Waste
ASTM D4979-08 Standard Test Method for Physical Description Screening Analysis in Waste
ASTM D4981-08 Standard Test Method for Screening of Oxidizers in Waste
ASTM D4982-95(2007) Standard Test Methods for Flammability Potential Screening Analysis of Waste
ASTM D4984-06 Standard Test Method for Carbon Dioxide in Natural Gas Using Length-of-Stain Detector Tubes
ASTM D4985-09 Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)
ASTM D4986-03 Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials
ASTM D4987-99(2008) Standard Test Method for Tensile Breaking Strength of Perforations in One-Part Continuous Forms Paper
ASTM D4988-96(2006) Standard Test Method for Determination of Alkalinity of Paper as Calcium Carbonate (Alkaline Reserve of Paper)
ASTM D4989-90a(2008) Standard Test Method for Apparent Viscosity (Flow) of Roofing Bitumens Using the Parallel Plate Plastometer
ASTM D4990-97a(2005)e1 Standard Specification for Coal Tar Glass Felt Used in Roofing and Waterproofing
ASTM D4991-07 Standard Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method
ASTM D4992-07 Standard Practice for Evaluation of Rock to be Used for Erosion Control
ASTM D4993-08 Standard Practice for Calculation and Adjustment of Silica (SiO2) Scaling for Reverse Osmosis
ASTM D4994-89(2009) Standard Practice for Recovery of Viruses from Wastewater Sludges
ASTM D4995-04 Standard Specifications for Electronic and Degreasing Grades of 1,1,2-Trichloro 1,2,2,-Trifluoroethane Solvent
ASTM D4998-95(2003)e1 Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids
ASTM D5000-05 Standard Practice for Evaluating Activity of Clay Elements Using a Side-Stream Sensor
ASTM D5001-08 Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)
ASTM D5002-99(2005) Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D5003-06a Standard Test Method for Hardgrove Grindability Index (HGI) of Petroleum Coke
ASTM D5004-89(2004)e1 Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
ASTM D5006-03 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
ASTM D5007-99(2008) Standard Test Method for Wet-to-Dry Hiding Change
ASTM D5008-07 Standard Test Method for Ethyl Methyl Pentanol Content and Purity Value of 2-Ethylhexanol By Gas Chromatography
ASTM D5009-02(2005) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM D5010-08ae1 Standard Guide for Testing Printing Inks and Related Materials
ASTM D5011-92(2009) Standard Practices for Calibration of Ozone Monitors Using Transfer Standards
ASTM D5012-01(2008) Standard Guide for Preparation of Materials Used for the Collection and Preservation of Atmospheric Wet Deposition
ASTM D5013-89(2009) Standard Practices for Sampling Wastes from Pipes and Other Point Discharges
ASTM D5015-02(2008) Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination
ASTM D5016-08e1 Standard Test Method for Total Sulfur in Coal and Coke Combustion Residues Using a High-Temperature Tube Furnace Combustion Method with Infrared Absorption
ASTM D5017-96(2003)e1 Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance
ASTM D5018-89(2009) Standard Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches
ASTM D5019-07a Standard Specification for Reinforced CSM (Chlorosulfonated Polyethylene) Sheet Used in Single-Ply Roof Membrane
ASTM D5022-07 Standard Specification for Identification of Vials and Ampoules Containing Concentrated Solutions of Drugs to be Diluted Before Use
ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5024-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression
ASTM D5025-05 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
ASTM D5026-06 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension
ASTM D5028-09 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
ASTM D5029-98(2009) Standard Test Method for Water Solubles in Activated Carbon
ASTM D5030-04 Standard Test Method for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit
ASTM D5031-01(2006) Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings
ASTM D5032-97(2003) Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Glycerin Solutions
ASTM D5034-09 Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
ASTM D5035-06(2008)e1 Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method)
ASTM D5036-99(2005) Standard Practice for Application of Adhered Poly(Vinyl Chloride) Sheet Roofing
ASTM D5040-90(2005) Standard Test Methods for Ash Content of Adhesives
ASTM D5041-98(2004) Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints
ASTM D5042-90(2009) Standard Test Method for Estimating the Organic Fouling of Particulate Anion Exchange Resins
ASTM D5043-04 Standard Practice for Field Identification of Coatings
ASTM D5044-06 Standard Test Method for Rubber Compounding Materials—Free 2-Mercaptobenzothiazole (MBT) in Benzothiazyl Disulfide (MBTS)
ASTM D5045-99(2007)e1 Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials
ASTM D5047-09 Standard Specification for Polyethylene Terephthalate Film and Sheeting
ASTM D5048-03 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame
ASTM D5050-08 Standard Guide for Commercial Use of Lime Kiln Dusts and Portland Cement Kiln Dusts
ASTM D5051-06 Standard Test Method for Rubber Compounding Materials—Benzothiazyl Disulfide (MBTS)—Assay
ASTM D5052-00(2005) Standard Test Method for Permeability of Leather to Water Vapor
ASTM D5053-03e1 Standard Test Method for Colorfastness of Crocking of Leather
ASTM D5054-90(2004)e1 Standard Test Method for Rubber Chemicals-Diphenyl Guanidine (DPG) and Di-o-tolyl-guanidine (DOTG) Assay
ASTM D5055-09 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
ASTM D5056-04 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
ASTM D5057-90(2006) Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste
ASTM D5058-90(2007) Standard Test Methods for Compatibility of Screening Analysis of Waste
ASTM D5059-07 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy
ASTM D5060-07 Standard Test Method for Determining Impurities in High-Purity Ethylbenzene by Gas Chromatography
ASTM D5061-07 Standard Test Method for Microscopical Determination of the Textural Components of Metallurgical Coke
ASTM D5062-09 Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination
ASTM D5063-90(2004) Standard Guide for Use of Certification of Coating Conformance Form
ASTM D5064-07 Standard Practice for Conducting a Patch Test to Assess Coating Compatibility
ASTM D5065-07 Standard Guide for Assessing the Condition of Aged Coatings on Steel Surfaces
ASTM D5066-91(2005) Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints-Weight Basis
ASTM D5067-05 Standard Specification for Artists' Watercolor Paints
ASTM D5068-04(2009) Standard Practice for Preparation of Paint Brushes for Evaluation
ASTM D5069-07 Standard Practice for Preparation of Paint-Roller Covers for Evaluation of Architectural Coatings
ASTM D5070-90(2005) Standard Test Method for Synthetic Quaternary Ammonium Salts in Fabric Softeners by Potentiometric Titrations
ASTM D5071-06 Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus
ASTM D5072-09 Standard Test Method for Radon in Drinking Water (Withdrawn 2008)
ASTM D5073-02(2007) Standard Practice for Depth Measurement of Surface Water
ASTM D5074-90(2008) Standard Practice for Preparation of Natural-Matrix Sediment Reference Samples for Major and Trace Inorganic Constituents Analysis by Partial Extraction Procedures
ASTM D5075-01(2007) Standard Test Method for Nicotine and 3-Ethenylpyridine in Indoor Air
ASTM D5076-90(2006) Standard Test Method for Measuring Voids in Roofing and Waterproofing Membranes
ASTM D5077-90(2009) Standard Terminology Relating to Electrostatic Discharge (ESD) Packaging Materials
ASTM D5078-95(2006) Standard Specification for Crack Filler, Hot-Applied, for Asphalt Concrete and Portland Cement Concrete Pavements
ASTM D5079-08 Standard Practices for Preserving and Transporting Rock Core Samples
ASTM D5080-08 Standard Test Method for Rapid Determination of Percent Compaction
ASTM D5081-90(2005) Standard Test Method for Aggregate Layer Hiding Power
ASTM D5082-99(2005) Standard Practice for Application of Mechanically Attached Poly(Vinyl Chloride) Sheet Roofing
ASTM D5083-08 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
ASTM D5084-03 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
ASTM D5085-02(2008) Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography
ASTM D5086-01(2008) Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry
ASTM D5087-02(2008) Standard Test Method for Determining Amount of Volatile Organic Compound (VOC) Released from Solventborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
ASTM D5088-02(2008) Standard Practice for Decontamination of Field Equipment Used at Nonradioactive Waste Sites
ASTM D5089-95(2008) Standard Test Method for Velocity Measurements of Water in Open Channels with Electromagnetic Current Meters
ASTM D5090-07 Standard Practice for Standardizing Ultrafiltration Permeate Flow Performance Data
ASTM D5091-95(2007) Standard Guide for Water Analysis for Electrodialysis/Electrodialysis Reversal Applications
ASTM D5092-04e1 Standard Practice for Design and Installation of Ground Water Monitoring Wells
ASTM D5093-02(2008) Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
ASTM D5094-04 Standard Test Methods for Gross Leakage of Liquids from Containers with Threaded or Lug-Style Closures
ASTM D5095-91(2007) Standard Test Method for Determination of the Nonvolatile Content in Silanes, Siloxanes and Silane-Siloxane Blends Used in Masonry Water Repellent Treatments
ASTM D5096-02(2007) Standard Test Method for Determining the Performance of a Cup Anemometer or Propeller Anemometer
ASTM D5098-05a Standard Specification for Artists' Acrylic Dispersion Paints
ASTM D5099-08 Standard Test Methods for Rubber—Measurement of Processing Properties Using Capillary Rheometry
ASTM D5100-95a(2005) Standard Test Method for Adhesion of Mineral Aggregate to Hot Bitumen
ASTM D5101-01(2006) Standard Test Method for Measuring the Soil-Geotextile System Clogging Potential by the Gradient Ratio
ASTM D5102-04 Standard Test Method for Unconfined Compressive Strength of Compacted Soil-Lime Mixtures
ASTM D5103-07 Standard Test Method for Length and Length Distribution of Manufactured Staple Fibers (Single-Fiber Test)
ASTM D5105-05 Standard Practice for Performing Accelerated Outdoor Weathering of Pressure-Sensitive Tapes Using Concentrated Natural Sunlight
ASTM D5106-08 Standard Specification for Steel Slag Aggregates for Bituminous Paving Mixtures
ASTM D5107-03(2007) Standard Practice for Preparatory Surface Cleaning of Architectural Sandstone
ASTM D5108-90(2007) Standard Test Method for Organotin Release Rates of Antifouling Coating Systems in Sea Water
ASTM D5109-99(2004) Standard Test Methods for Copper-Clad Thermosetting Laminates for Printed Wiring Boards
ASTM D5110-98(2004) Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
ASTM D5111-99(2006) Standard Guide for Choosing Locations and Sampling Methods to Monitor Atmospheric Deposition at Non-Urban Locations
ASTM D5112-98(2009) Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products
ASTM D5113-97(2005) Standard Test Method for Determining Adhesive Attack on Rigid Cellular Foam
ASTM D5114-90(2004) Standard Test Method for Laboratory Froth Flotation of Coal in a Mechanical Cell
ASTM D5115-90(2004) Standard Test Method for Collecting Gross Samples and Determining the Fuel Quality of RDF
ASTM D5116-06 Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions From Indoor Materials/Products
ASTM D5117-09 Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock
ASTM D5118/D5118M-05ae1 Standard Practice for Fabrication of Fiberboard Shipping Boxes
ASTM D5120-90(2004) Standard Test Method for Inhibition of Respiration in Microbial Cultures in the Activated Sludge Process
ASTM D5121-06 Standard Practice for Preparation of Rock Slabs for Durability Testing
ASTM D5124-96(2007) Standard Practice for Testing and Use of a Random Number Generator in Lumber and Wood Products Simulation
ASTM D5125-97(2005) Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups
ASTM D5126-90(2004) Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in the Vadose Zone
ASTM D5127-07 Standard Guide for Ultra-Pure Water Used in the Electronics and Semiconductor Industries
ASTM D5128-90(2005) Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
ASTM D5129-95(2008) Standard Test Method for Open Channel Flow Measurement of Water Indirectly by Using Width Contractions
ASTM D5130-95(2008) Standard Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method
ASTM D5131-90(2007) Standard Guide for Record Keeping for Electrodialysis/Electrodialysis Reversal Systems
ASTM D5132-04 Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles
ASTM D5133-05 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM D5134-98(2008)e1 Standard Test Method for Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography
ASTM D5135-07 Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography
ASTM D5136-09 Standard Specification for High Purity p-Xylene
ASTM D5137-07 Standard Specification for Hexyl Acetate
Cheapest & Original
Any question, send the mail to findstandards@tom.com directly
findstandards.info
DIN Standards
BSI Standards
ASTM Standards
ISO Standards
SAE Standards
JIS Standards
NFPA Standards
IEEE Standards
Search & Listing Portal for ASTM Standards
Search & Listing Portal for ISO Standards
Search & Listing Portal for IEC Standards
Search & Listing Portal for BSI Standards
Search & Listing Portal for DIN Standards
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment